Rev It Liberty H2O Heated Motorcycle Gloves

The Rev It Liberty H2O Heated Motorcycle Gloves are
part of the latest REV’IT! collection.

The heated Liberty H2O motorcycle gloves have been specifically designed
to be highly protective, waterproof, and feature Rev’It!’s high-tech
THERMOTRONIC technology system that is meant to keep your hands at the
ideal temperature of around 33 degrees Celsius, regardless of weather
influences such as wind, moist and cold. The THERMOTRONIC features 4
different heating levels (from higher heat to lower heat) that can
easily be adjusted with the large button on the upper part of the glove.
Thanks to the coloured ring around the button, it’s very easy to see
what level of warmth your motorcycle gloves are providing.

The outside of the motorcycle gloves is constructed with a flexible
softshell on the upper side, and leather on the inside of the hand. An
additional grip patch on the palm further provides more control of the
handlebars of your motorcycle. Rev’It! combined Exkin Platinum with
PrimaLoft Gold insulation to keep your hands warm and comfortable in the
cold. By using a hard-shell knuckle protector combined with a TPU palm
slider, the Liberty H2O gloves offer a heavy dose of protection in case
of a mishap. And since it has an incorporated Hydratex|Z-liner
construction, 100% waterproofing is guaranteed. Additionally, reflective
stripes and logos are added to the top of the hands for increased
visibility. And let’s not forget the inclusion of the Connect Finger Tip
fabric that allows you to operate touchscreens without removing your
hand protection, especially when it’s cold out. Keep your hands
comfortable even when temperatures take a dive with the Liberty H2O
motorcycle gloves.

Key Features / Points:

• Hybrid Softshell & Goatskin Outer
• Integrated Thermotronic Heating System (Batteries Included)
• Waterproof & Breathable Hydratex Membrane
• Exkin & PrimaLoft Thermal Insulation Layer
• CE Level 1 KP Certified

Rev
It Motorcycle Gloves. Touring
Motorbike Gloves.

PLEASE NOTE: The included lithium-ion battery is not fully charged.
Please fully charge before use. Only use a 5V at 2.1A USB-A adapter for
charging

The Rev’It! Liberty H2O Heated Motorbike Gloves are
packed with features…

PROTECTION FEATURES

Outer Shell

• Softshell 3L
• Flock PU – Flocking is the process of adhering small fibre
  particles (called flock) onto a surface. This process creates a
  texture that picks up water
• Twill Stretch
• Goatskin Drum Dyed with WR Finish
• Goat Digital – Grip-enhancing goatskin leather applied to palm
  of the hand
• Taslan
• Connect Finger Tip Fabric

Insulation

• Fixed REV’IT! Thermotronic Heating Technology System –
  Integrated 7.4V circuit heating system with adjustable heating levels
• PrimaLoft Gold Eco with Grip Control 60g – PrimaLoft Gold is a
  thin yet exceptionally warm, top-quality insulation. Its
  ultra-lightweight and packable properties allow for exceptional
  breathability, but all for moisture to escape, keeping the body warm
  in the cold and cool in the heat
• Exkin Platinum Insulation Material
• High Loft Fur Liner – This type of insulation mimics the
  natural insulation properties of animal fur, a high loft construction;
  containing more air then fiber; it is a type of natural insulation
  that traps in the heat

Lining

• Tri-Fleece Liner – This polyester tricot fabric is used for
  glove lining, and brushed to provide extra warmth without adding any
  bulk. The lining wicks moisture away, to prevent hands from getting
  damp

Protection

• Hard Shell Knuckle – Level 1 KP Certified according to the EN
  13594:2015 standard
• TPU Hard Shell Palm Slider – Palm slider made of a durable and
  high abrasion resistant TPU material at the palm side of the glove.
  The palm slider makes sure that the glove slides in case the palm of
  the hand comes in contact with the asphalt. The abrasion resistance of
  gloves equipped with these sliders is greatly increased, thus reducing
  the risk of injury significantly
• Temperfoam Palm Slider
• Temperfoam Thumb Knuckle

Visibility

• Laminated Reflection

Waterproofing & Breathability

• Hydratex|Z-Liner – A waterproof layer is laminated onto a
  carrier to construct the REV’IT! Hydratex|Z-liner membrane. The
  carrier, in turn, protects the membrane against wear-and-tear damage,
  and the seams of the membrane are taped to ensure waterproofing. The
  Z- liner is constructed between the lining and the outer shell. The
  REV’IT! Hydratex|Z-liner membrane is used in garments that demand a
  high level of all-weather protection

Composition

• Outer Shell – 60% Polyester, 30% Drum dyed goatskin, 7%
  Polyurethane, 3% Elastane

ERGONOMIC FEATURES

Adjustability

• Stretch Lips at Fingers
• Adjustment Strap at Wrist – The hook-and-loop adjustment strap
  at the wrist allows for optimum adjustability and fit when using the
  gloves. Find the ideal tightness and comfort every time it is used
• Elastic Drawcord at Cuff – Elastic drawcord to adjust fit of
  the cuff of the glove

Features

• Conductive Fingertip at Index Finger and Thumb – Never take off
  your gloves again to answer your phone or navigation system. The
  connect fingertip has been specifically designed to operate touch
  screens

• Visor Wiper – The material used on the index finger of the
  glove has a visor wipe function. It helps clear water or moisture off
  the visor for better visibility when riding in wet weather
• Long Cuff
• Grip Panel at Palm
• Battery Set for REV’IT!’s Thermotronic Heating Technology – Set
  containing two 7.4V batteries and micro-USB lead

PLEASE NOTE: The included lithium-ion battery is not fully charged.
Please fully charge before use. Only use a 5V at 2.1A USB-A adapter for
charging